How To Use Phone On Fossil Watch

Fossil spotter won't pair with a new phone? Don't worry. Your new telephone isn't necessarily faulty. In fact, the chances are that the WearOS app is to arraign and that yous'll be able to fix the issue by following a few simple steps.

It seems to be a common issue that enough of people take experienced before. And so, we are here to aid you lot solve it.

Fossil Gen v releases new features via software update
Depression VO2 Max Score on Fitness Tracker? Here'south what you lot should know
Which Smartwatch has the best heart charge per unit tracking accuracy? Information technology depends
wearOS now has a formidable partner in SnapDragon 4100, will it step up?

And with all that said, allow united states of america get correct into information technology!

Fossil Watch won't pair with a new Phone? Try rebooting it

As nosotros mentioned above, it's not necessarily the phone itself or the watch that's at fault. The chances are that your phone's operating organisation, WearOS app, or both are not working as intended.

Sometimes, an easy way to get around such problems is simply turning your telephone off and on. And while the exact procedure can differ from device to device, generally, all y'all take to do is:

Hold downwards the power push button or for iPhone, the power push and volume up buttons.
For iPhone, slide to ability off. For Android, select "Restart" or "Reboot" and confirm
Wait until your phone boots again
Then try pairing the lookout again

This requires nothing more than than the printing of a button. Then, worst-case scenario, y'all lose a infinitesimal of your life while waiting for the phone to kicking up again.

And if information technology doesn't work, motion on to the next possible solution.

Manufacturing plant Reset your Fossil Watch

Another mutual solution is performing a factory reset on the Fossil Sentry and and then replacing it with your new phone.

This is going to delete all of your watch's settings and preferences – which means that yous'll take to set up everything again from scratch. But, hey, if that makes your lookout man piece of work once again, we'd say that's a small cost to pay.

To perform a mill reset on Fossil watches:

Go to your Settings through the app menu and choose System.
Tap Disconnect & Reset and confirm
Go to your telephone'due south Bluetooth settings
Select your sentinel
Remove it from the list of Bluetooth devices (Either by "Remove," "Forget This Device," or anything similar)
And then pair your watch with the phone as you did at the beginning

If information technology doesn't work the starting time time, try it again once or twice over again.

There have been plenty of reports from users that they had to do it 3 times or even more before their watch decided to piece of work normally again.

Fossil Watch won't pair with your new Phone? Perhaps you are doing information technology wrong

Everything we've mentioned until now was assuming that you are doing everything correctly and that your app or OS are bugged. Even so, in that location is also a take a chance that you lot are the i who's doing something wrong and that the watch/app/Bone are all working just fine.

So, hither are some things that you may have missed.

ane: WearOS Needs to have the Appropriate Permissions

Smartwatches are very intrusive by design. Smartwatch apps generally ask permission to get admission to calls, notifications, location, recording, text messages, calls, and a lot of other stuff.

Not granting one of these permissions may render your picket unusable until you give it access again. And so, if you lot recollect you accidentally or purposefully refused to give the required permission to your sentinel through the WearOS app, you'll so have to get back to your phone'south settings and requite WearOS admission to whatever it needs.

The exact process can slightly differ depending on the phone that you are using. To do it on stock Android 10:

Organization settings
Apps & notifications
Run across all apps
Habiliment Bone
Permissions

Then give it access to everything it needs.

Fossil Watch Won't Pair With new Phone

If y'all can't notice the permissions through the same steps, we showcased above. This means that y'all are on a different Android version or skin. And so, just Google "How to change app permissions on (your device)."

2: Make Sure that Bluetooth is Enabled

Smartwatches, including Fossil, need Bluetooth connectivity to communicate with a smartphone. Otherwise, they simply aren't going to piece of work to their full potential.

WearOS should prompt you to enable Bluetooth if it's disabled.

Just, if it doesn't, you can enable it on Apple tree device via Settings > Bluetooth or on Android past going to:

Settings
Connected Devices
Connection preferences
Bluetooth
On

Fossil Watch Won't Pair With new Phone

Of course, there is always the option of activating information technology through the taskbar'due south Quick Settings. And the same goes for iPhones. Simply, again, y'all'll have a rough time making WearOS work with an iOS device.

3: Other Possible Mistakes

You lot need the latest WearOS app. Brand sure it's installed, or the watch won't pair/piece of work properly
Make certain that the watch is inside a reasonable distance to your smartphone. Bluetooth can't accomplish very far, so the watch won't be able to pair if it'due south out of range
The watch may still be paired with your old phone. Unpair it or turn the old phone off, and so try pairing it with your new smartphone once more
Your lookout is out of battery. Make sure that it is charged

Is your Fossil smartwatch non pairing with your iPhone?

Unfortunately, if you are on an iPhone, the WearOS app on iOS is an extreme mess with nothing only bugs. And it rarely always seems to work as information technology should.

So, in that instance, it'south non you – information technology'south the app.

Try these steps to go your Fossil wearOS smartwatch pairing to your iPhone

Uninstall the wearOS app
Turn Bluetooth off, and then turn your iPhone off. Wait 20-thirty seconds, then power support
Open up the App Store and reinstall the wearOS app
Subsequently installing the app, plow Bluetooth back on
Open up the wearOS app and try to connect your watch

If these steps don't work, manufacturing plant reset your Fossil via Settings > Organization > Disconnect & Reset. And so repeat these steps.

Summary

And that's about it for at present. Hopefully, this guide helped y'all solve the problem. If not, give us a few more than details in the comments, and the MyHealthyApple team may be able to aid you or achieve out to Fossil tech support for the all-time communication.

We sometimes use affiliate links in our content from Amazon and others. It doesn't cost you annihilation but helps u.s. pay our expenses. Thanks for the support! Final update on 2022-09-21 / Affiliate links / Images from Amazon Product Advertising API